Scope of this page. Choosing between a liability-only policy and what insurers call “full coverage” in Texas. The state minimum is defined in Tex. Transp. Code §601.072(a-1); the lender’s requirement is a contract term, not a statute; and two coverages that people assume are optional (UM/UIM and PIP) are governed by the Insurance Code. Prices are not on this page, deliberately — the structure decision comes first, the quote second.

Short answer. “Full coverage” has no legal definition in Texas. It is shorthand for liability plus collision plus comprehensive, and sometimes a set of extras. Liability alone is legal for a car you own outright; a lender or lessor will normally require collision and comprehensive until the loan is satisfied. Whether full coverage is worth it is a question about the car’s value against the deductibles and the premium difference — not about the law.

What each option pays

Coverage Pays for Typical trigger Who requires it
Bodily injury liability Other people’s injuries You are at fault State law (minimum limits)
Property damage liability Other people’s property You are at fault State law (minimum limits)
Collision Your car’s damage Collision, regardless of fault Lender/lessor, if financed
Comprehensive Your car’s damage Theft, fire, weather, animals, vandalism Lender/lessor, if financed
UM/UIM Your injuries caused by an uninsured or underinsured driver The other driver is at fault and lacks coverage Must be offered; rejection must be in writing
PIP Your medical costs and some lost wages Your own injury, regardless of fault Must be offered; rejection must be in writing

Two rows deserve attention because they change the comparison. UM/UIM and PIP are not “extras” a seller is upselling — §1952.101 and §1952.152 require the insurer to provide them unless the named insured rejects them in writing. A “liability only” quote that silently drops them is a different product than the one most drivers think they are buying, and the difference shows up at the worst possible moment: after an injury caused by someone with no insurance.

The decision, in the order it should be asked

  1. Is the car financed or leased? If yes, the contract decides — collision and comprehensive are required until the lien is released. No further analysis is needed; read the loan document.
  2. Can you absorb the car’s replacement cost? If losing the vehicle outright would not change your life, comprehensive and collision are buying convenience, not protection.
  3. What do the deductibles cost against the value? A $1,000 deductible on a car worth a few thousand dollars means most claims pay little or nothing.
  4. Do you have UM/UIM and PIP? This is not part of the full-vs-liability question, but it changes what “cheap” means.

Financed or leased: what to confirm

The lender’s requirement is not the state’s requirement, and the two diverge in both directions:

  • State law asks for liability limits only. A financed car with liability only is legal to drive and a breach of the loan agreement.
  • The loan agreement normally requires collision and comprehensive with a deductible at or below a stated maximum, and often names the lender as loss payee.
  • A lease typically requires higher limits than the state minimum, because the lessor owns the asset and wants its exposure covered.

Practical step: ask the lender for the insurance requirements in writing before shopping. Insurers will ask for the loss-payee clause and the required limits anyway; getting it wrong mid-term can trigger a force-placed policy, which is usually the most expensive coverage you will ever buy.

Do you need full coverage on an old car?

This is the most-searched version of the question, and it has an arithmetic answer rather than a slogan:

Maximum payout ≈ car’s actual cash value − deductible. If that number is small relative to the premium difference over a year, the coverage is not protecting much. Then subtract the scenarios where comprehensive still pays disproportionately: theft (an older car can still be stolen), a total loss from weather, and a fire. Comprehensive is often the cheaper half of “full coverage” and the one that covers events you cannot avoid by driving carefully.

The honest framing: dropping collision on an old car is a considered bet that you will not cause damage exceeding the deductible plus the premium you saved. Dropping comprehensive as well is a bet that the car will not be stolen, flooded, or hit by hail. Both bets are legitimate; neither is free.

How to compare two quotes without fooling yourself

A quote is only comparable when everything except the price is identical. Build the comparison as a matrix — one row per term, one column per quote. The terms below are the buyer’s own inputs (limits and deductibles you choose), not prices quoted by any insurer:

Term Quote A Quote B
Bodily injury limits 30/60 100/300
Property damage limit 25 100
UM/UIM limit 30/60 100/300
PIP $2,500, no rejection rejected in writing
Collision deductible $500 $1,000
Comprehensive deductible $500 $1,000
Rental reimbursement none $30/day
Named drivers 2 2 (one excluded)

The two columns above are not like-for-like: Quote B has materially higher liability and UM limits, a larger deductible, and no PIP. Presenting B as “cheaper” would be a category error — and it is the exact error most comparison pages commit. Use the quote comparison tool to enter your own offers; it flags the mismatched terms rather than ranking them.

Why a cheaper liability quote is not automatically better

Three reasons, in order of how often they bite:

  1. The limits differ. A 30/60/25 policy is not a cheaper version of a 100/300/100 policy; it is a different risk transfer.
  2. The rejection box was ticked. UM/UIM or PIP removed “to save money” is the most common silent downgrade. The saving is real; so is the exposure.
  3. The deductible moved. A $1,000 deductible against a $2,500 comprehensive claim pays $1,500, not $2,500.

What TDI says about shopping — and what it does not do

The Texas Department of Insurance publishes consumer guidance and the HelpInsure comparison resource. What it provides: an explanation of coverages, complaint data by insurer, and a way to compare sample rates for a defined profile. What it does not provide: a personalised quote, or an endorsement of any insurer. Using it as a sanity check before you shop is exactly the right use.

What the coverage gap calculator can and cannot tell you

The Texas coverage gap calculator shows what a claim of a given size would leave uncovered at different liability limits, and how much of that exposure an umbrella or higher limits would absorb. It uses your inputs and the statutory limits; it does not know your policy’s exclusions, your insurer’s claims practices, or whether a court would find you liable at all. Treat its output as arithmetic, not as advice about a specific claim.

A worked comparison without prices

For example, take a driver with a car worth about $9,000, no loan, a $1,000 collision deductible under consideration, and a clean record. Two structures, and no premiums involved:

Structure 1 — liability only (with UM/UIM and PIP retained). A crash the driver causes: the other party is paid up to the limits, the driver’s own car is a total loss with no recovery. A crash caused by an uninsured driver: UM responds to the driver’s injuries, and the driver’s own car is again unrecovered.

Structure 2 — full coverage. The same crash caused by the driver: the other party is paid up to the limits, and the driver’s own car is repaired or paid at actual cash value minus the deductible. Theft and weather are covered. The premium is higher by the cost of collision and comprehensive.

The decision reduces to one question the driver can answer without any market data: is the annual cost of collision and comprehensive worth more to me than the chance of losing up to the car’s value? That is a personal risk preference, and it is the only honest way to frame it.

Sources

  • Tex. Transp. Code §601.072(a-1), (b) — minimum liability limits and permitted exclusions.
  • Tex. Ins. Code §1952.101 — UM/UIM must be provided unless rejected in writing.
  • Tex. Ins. Code §1952.105 — UM limits capped at the policy’s bodily injury limits; property damage UM carries a $250 deductible.
  • Tex. Ins. Code §1952.152 — PIP must be provided unless rejected in writing.
  • Texas Department of Insurance — consumer coverage explanations, complaint data, and HelpInsure.